-
1 kW Pulsed and Sinusoidal Power Supply – Related to Laboratory-Research Plasma Equipment
Application:
Starting up various types of plasma systems such as DBD plate (Plate to Plate), atmospheric plasma jet, plasmas under vacuum and low pressure
-
11 kV and 20 kV Power Plant Busbar
Application:
used As windings of high pressure electric motors in all power plant generators with a power of more than 400 MVA
-
20 kV Electronic Sectionalizer – with Internal RTU System with SCADA Modem Module
Application:
* Connecting and disconnecting the disconnector switch remotely online by all SCADA pieces of software
* Monitoring network dynamic parameters such as current, voltage, active and reactive power, frequency and power factor
* Isolation of the fault area automatically
* Persistent and transient fault detection
* Sending parameters related to the state of the disconnector switch, such as the state of the mechanical lock and gas pressure of the disconnector
-
20 kV Gas-Insulated Load-Break Switch – that Can Be Turned Off under Load
Application:
* All electricity distribution companies for use in medium-pressure overhead networks
* Oil and gas companies using overhead lines
* All industrial plants that have medium pressure electricity branch connection
-
24 kV Gas-Insulated Switch Disconnector
Application:
Comprehensive management of electrical energy distribution systems and network control and reduction of blackouts
-
25 MW Turbocompressor Control System (TC)
Application:
used In the gas refinery and gas transmission lines to control turbocompressors or software test of the control system of turbocompressors before starting the unit.
-
50kW Fast Multi-Protocol Electric Vehicle Charging
Application:
Charging stations for electric cars and charging electric cars quickly, such as:
* Public parking lots
* Commercial and administrative centers, offices
* Electric vehicle charging stations
* Hotels
* Airports
-
Airport Power Supplies
Application:
Uninterrupted power supply for starting power generation and other types of helicopter and airplane power supply
-
All Kinds of Smart Relay Modules – Along with Smartification Software
Application:
* Customization for specific purposes and buildings, smartification and automation of all types of buildings, office, commercial, residential, hotel, hospital, etc.
* Building lighting control, cooling – heating and electric curtains
* Audio, entrance and exit and security systems
-
AMT105 Multi-Purpose Device – for Testing Relays, Transformers, Power Switches
Application:
* Comprehensive testing of all types of relays
* Testing the power transformers
* Testing the power switches
* Ability to carry out current transformer tests
* Ability to test all types of meters and transducers
-
Analog and Digital data Collector Card – on Modbus Protocol
Application:
* Use in remote monitoring and control systems and warning systems
* Collecting information on all types of sensors and equipment available in:
• Oil Company
• Refinery
• Petrochemical
• Water and sewage company
• Gas company
-
Battery Charger – Up to 220 Volts Voltage and 400 Amperes Current
Application:
* Steel and iron smelting
* Petroleum products
* Power plant
* Electric substations
* Mining (extraction, exploitation and processing)
-
Battery Management System (BMS)
Application:
Voltage control, current control, temperature control, charging rate calculation, operating time prediction and balancing of electric vehicle battery cells.
-
Data Concentrator Sending Unit of Electricity Network Counters and Meters (DCU)
Application:
* In all regional power stations, power plants, distribution and subtransmission up to the voltage level of 400KV
* All industrial centers such as oil and gas refineries, petrochemical, steel, cement, copper, agriculture and industry, etc.
-
Data Logger and RTU
Application:
As one of the components of the automation system for telemetry of drinking water wells
-
Data Logger of Voltage and Current Parameters – of mains Electricity
Application:
* Electrical panel
* Elevator panels
* Power quality monitoring
* Calculation of capacitor banks for electrical panels
-
Data Logging System – Data Logger
Application:
Fixing system defects and line repairs in industries such as oil, gas and petrochemicals, power plants, steel, cement, textile, automobile manufacturing, etc.
-
DC Switching Power Supply – Up to 20 kW Output
Application:
This power supply used in electrochemical, aerospace, industrial automation, welding, etc.
-
Elevator Control Panel – Including Inverter Up to 7.5 kW and UPS Up to 1.5 kW
Application:
* Elevator motor speed control
* Controling the direction of movement
* Electrical protection of equipment
* Real-time recognition of cabin position
-
Elevator Drive Motors – of Synchronous and Asynchronous Type
Application:
* Cabin speed control
* Cabin acceleration control
* Cabin movement control along the entire movement path
* Measurement of motor parameters including current, voltage, etc.
* Increasing the quality of elevator motion
-
Fault Recorder Device and Event Recorder of Transmission Substations and Distribution Substations
Application:
* Used for monitoring and troubleshooting the operation of protection and control equipment of production, transmission and distribution grids of electricity, oil, gas and petrochemical steel and iron
* Management and planning of maintenance and repairs of equipment related to the protection and control of the aforementioned networks
* Observing and supervising the performance of protection and control equipment in dispatching centers
-
Gas House Switch – with and without Automation
Application:
To disconnect and connect the voltage, to transmit the information of voltage, current, power and the status of electricity
-
Generator Static Excitation System – MAPEX-E Class
Application:
used In thermal, hydroelectric and gas power plants to control the operation of the generator (class E) and regulate its voltage and reactive power
-
Ground and Air Three-Phase Fault Indicator on 24 kV
Application:
* Use for troubleshooting of power distribution networks.
-
Industrial Battery Chargers – with 50 to 1000 amps Chopper Stabilizer
Application:
* High pressure and medium pressure substations
* Power plants
* Telecommunication sites
* Traffic control stations
* Subway and city train stations
-
Industrial Charger
Application:
* Industrial units
-
Industrial Control and Monitoring System
Application:
Control and monitoring of industrial, laboratory and research processes
-
Industrial UPS in NG Model
Application:
* Use in industries and data centers
* Supplying electricity needed for various equipment and systems in various industries and during power outages
* Industrial automation systems
-
Integrated Brushless Permanent Magnet Electromotor
Application:
* Types of water coolers
* Types of blowing or suction fans
* Washing machine
* Types of refrigeration compressors
* Motorcycles and electric bicycles
-
Intelligent Boiler Room Control – in SES, SES.NET and SES.PRO Models
Application:
* Residential buildings
* Office and commercial buildings
* Educational centers, schools and universities
* Industrial companies
* Hotels
* Hospitals
* Shopping centers
-
Intelligent Medium Pressure Compact Panel – with SF6 Gas Insulation
Application:
* All types of electrical substations
* Wind power plants
* Solar power plants
* CHP gas power plants
* Hotels, shopping centers and residential and office complexes
* Tunnels and subways
* Large military and commercial ships
-
Intelligent System – for Detecting Vandalism Events of Power Transmission Towers Using MEMS Technology
Application:
Preventing the occurrence of vandalism in power transmission towers
-
Inverter Module of Back to Back Power – Converter-330 KVA
Application:
Used In auxiliary converter devices in subway locomotives
-
IRISA-SCADA Control Center Software
Application:
Collecting data from RTUs and monitoring them on the dispatching centers of electricity, fluid and transportation networks.
-
Island Mode Simulator (Mapsim)
Application:
* Manufacturers of power plant units (to perform dynamic testing during unit start-up)
* Power plant repair companies (to perform dynamic tests after major repairs of the unit)
* Industrial complexes with power plant units (for dynamic verification of power plant units)
- Electronics
- Medicine & Health
- Power & Control Engineering
- Oil, Gas & Petrochemical
- Telecommunications
- Construction Industry
- Industrial Machinery
- Mining Industry
- Software & Information Technology
- Laboratory Equipment
- Game & Animation
- Polymers and Composites
- Metals and Ceramics
- Energy & Power Plant Industries
- Agriculture, Livestock, Poultry and Aquatics
- Chemicals
- Food Industry
- Paints, Resins & Polymer Adhesives
- Medical Equipment