ICU Ventilator – EDP-DIOMEDE & EDP-TS Models
Application:
NICU, CCU, ICU, and emergency wards of hospitals and medical centers.
Product Introduction:
EDP-DIOMEDE: This device is an electro-pneumatic respiratory aid machine.
Oxygen and air resources connected to the pneumatic sections of the device provide the driving force. After the entrance of the gases in the pneumatic section, the electrical valve control, pressure sensors, and regulators provide the controlled flow according to the required ventilation for the patient and transfer the air via an inhalation valve. During mechanical ventilation, the machine does not exchange energy with the patient.
This device is equipped with various advanced modes to provide ventilation for the patients in invasive and non-invasive methods. An 18.5-inch touchscreen display can indicate every parameter related to the patient’s respiration (including the waveforms). In addition to an AC power input that connects the device to the city grid, it can also work with batteries.
This device can be used for adult and child patients that require ventilation for short or prolonged durations.
EDP-TS: EDP-TS is an electro-pneumatic ventilator with compressed air and high-pressure oxygen inputs. Central air of medical centers or portable compressors can be used as compressed air suppliers. Also, central oxygen or oxygen capsules can provide the required oxygen input. After the gases entrance to the pneumatic section, the air is supplied and transferred to patients according to user adjustments (through electronic valves control, pressure sensors, and regulators). The processor of the device executes the electronic controls. This device can provide care for patients with or without breathing ability. In case of technical failure, when the mechanical ventilation fails, the patient can breathe through the emergency vent.
The device is equipped with a battery as emergency power input. It can calculate and display parameters including inspiratory volume, expiratory volume, tidal volume the ratio of inhalation to exhalation flow and volume per minute The device. has a touchscreen display that provides faster parameter selection and easier access for the users.
Technical Specifications:
|
Model |
Specifications |
|
EDP-DIOMEDE |
* Various parts of the device: Manifold, board sensor, compressor unit, power unit, ventilation module, battery, HMI graphical user interface, frame, and trolley * Power input: 100-240 V, power consumption of 1.4 A current at 100 V |
|
EPD-TS |
* Various parts of the device: Manifold, board sensor, compressor unit, power unit, ventilation module, battery, HMI graphical user interface, frame, and trolley * Power input: 100-240 V, power consumption of 1.4 A current at 100 V |
International Standards or Permission:
* General electrical safety according to IEC 60601-1: 2005 standard
* Exclusive tests of the ventilator according to ISO 80601-2-12:2011 standard
* Software verification according to IEC 62304:2006 standard
* Electromagnetic compatibility according to IEC 60601-1-2:2014 standard
* ISO 17025
Related Products
Application:
Hospitals and medical centers with ventilation requirements for patients’ oxygenation.
Application:
* To hold, control, and move the camera in laparoscopic surgeries
Application:
A phaco-vitrectomy device can be used for vitreous and unclear eye lens extraction (cataract surgery) using a phaco method and stopping the bleeding on the surface or inside the eye.
Application:
Dialysis centers
Application:
* Ambulances; to provide mechanical ventilation or perform CPR
* Medical centers; to provide short-time ventilation for patients or while transferring the patient between the hospital wards
* Transferring the patient inside the city
* In war-time conditions for transferring the patient and performing CPR
Application:
Teaching spinal injections
Application:
Treatment of blepharoplasty, eyelid fat, acne, wrinkles, freckles, scar and skin fibroma.
Application:
In all public places where access to medical centers takes more than 10 minutes.
Application:
Treatment of skin diseases, including acne, burn marks, scar marks, stretch marks due to weight gain/loss, wrinkles, skin blemishes, open skin pores, psoriasis, rosacea, hyperpigmentation, and skin rejuvenation.
Application:
* Dentistry offices (Cosmetic surgeries of gums, jaw, dental implant surgery, gum removal)
* Medicine (skin, hair, aesthetics, removing skin lesions, hair transplant surgeries)
* General medicine (general surgeries and outpatient surgeries)
* Gynecology (removing genital warts and gynecological surgeries)
* Otorhinolaryngology (ENT surgeries)
Application:
* Treatment of ptosis
* Removing skin wrinkles and forehead lines
* Removing skin lesions, including nevi and freckles
* Skin rejuvenation
Application:
Production of various natural scaffolds, synthetic, single head, double head, and triple head bioprinters.