Rheometer and Mooney Viscosimeter
Application:
* Investigating the rheological properties of rubbers and elastomers
* The effect of temperature and time on the viscosity of rubber materials
* Obtaining specific points and graphical information
* Suitable for quality control as well as research and development to combine rubber and elastomeric compounds with calibration attachments.
Product Introduction:
Vulcanization of tires and elastomers is done to determine properties such as Mooney Viscosity, Mooney Scorch and Stress Relaxation using SMV-200 series devices. It is very easy to work with this device and the results are obtained with high accuracy, while all the test steps are done automatically. The user is responsible for placing the sample inside the device, and after that, with just one click, the test will proceed to the end. When the test is finished, the device door is automatically opened and the user can easily remove the cured mixture from the device.
It should be noted that according to the type of test, two types of standard rotors (with different diameters) can be selected and installed on the device.
Thus, for very viscous samples, where there is a possibility of slippage through the molds and the value of the Mooney Unit may exceed the torque capacity of the device, the small standard rotor is used.
Technical Specifications:
Torque measurement range | 0-100 Mooney units |
Temperature measurement | In the range of 25-200 ℃ by heat-resistant platinum sensors |
Rotor rotation speed | 2 ± 0.02 rpm |
Mold closing system | Pneumatic |
Vertical force of molds | 11.5 KN |
Disc clamping | Self-locking with height adjustment |
Disc ejection | Manual |
Air pressure | 6-10 bars |
Weight | 110 kg |
Moisture | 10 to 90% non-condensing |
Electricity consumption | 220 v, 10 A, single-phase, 50 hz |
Device dimensions | 105 × 69 × 55 cm |
Advantages:
* Lower price than similar products
* Very high efficiency
International Standards or Permission:
* ASTM D1646
* ISO 289:2005
* DIN 53525