Universal Tensile Devicesa Set (Tensile, Pressure, Bending Test) – Including Accessories 50, 100 and 250 Kg and 1, 2, 5, 10, 15, 60 and 100 Tons
Application:
Conducting tension, pressure and bending tests for various types of materials, including metals, wood, plastic, elastomers, ceramics, etc.
Product Introduction:
This device is designed to perform tension, pressure and bending test of different types of materials and for high tonnage, its performance type is mechanical servo using (two-column ball screw) and AC servo motor and driver.
zemic load cell with an accuracy of about 0.02% of FS is used to accurately measure force. Also, the displacement measurement accuracy is 0.001 mm.
The speed of the device for testing, despite its high tonnage, is in the range of 0.01-200 mm/min. The device has the ability to install different jaws to perform
various tests. The size and mechanical structure of the device, the shape, material and dimensions of clamps suitable for different tests (compressive, tensile, bending, stiffness and cyclic resistance, etc.), the axial orientation of the device, the drive specifications and the type and dimensions and shape of the sample and the required test speed are among the effective parameters in the design and construction of this device.
Technical Specifications:
Capacity to apply force | 0.1-15 tons (according to the buyer’s order) |
Sample clamp | In the range of 0-40 mm thickness without changing the jaws |
Capacity of different loads | 50-150 tons |
Different gap range | 300 – 1700 mm |
Advantages:
* Use of ball screw and load cell force application system with high precision
* Ability to install extensometer with high precision
* Replaceable load cells, jaws and fixtures
* Ease of use and maintenance
* Ability to test a wide range of materials
* High accuracy and repeatability
* Modular design
International Standards or Permission:
* ISO 6259
* ISO 527
* ASTM D638
Company | |
---|---|
Type | This product is a final B2B equipment. |
Main Export Destinations |