Bending and Rebending Testing Device

Application:

Bending and re-bending test of rebars and steel belts


Certified ByTrust

Product Introduction:

Bend & Rebend test is used to determine the quality of metals or welding against plastic deformation. The bending and re-bending device is most used in armature testing. The most important characteristics of an armature are ductility, crosssectional area, resistance to yield strength and rupture, and weldability. The bending and re-bending test is performed according to the conditions defined in the standard for different rebar diameters and bending and re-bending angles, and finally after the test, cracks or peeling are checked (visually).

Technical Specifications:

Model SBR-200B
Function Mechanical servo (servo motor and driver and solar gearbox)
Maximum capacity 5200 N.m equivalent to 20 Ton
User interface By HMI touch screen
Control system PLC type control system with the ability to adjust test method parameters
Bend angle range 0 -180 °
Angle adjustment accuracy 0.1 °
Operating temperature 10 to 50 degrees Celsius, 10 to 90% humidity, non-con-densing
Electricity consumption 380 ± 20 V, 25 A, three-phase
Dimensions 113 x 70 x 120 cm
Weight (approximate) 650 Kg

Advantages:

* Equipped with an industrial wheel and a special screw for installation on the ground

* Equipped with visual display of errors and warnings

* Equipped with a flash memory output for extracting test data including force, angular velocity, and torque in Excel format

* High safety during testing

* Lower price than similar products

* Very high efficiency

International Standards or Permission:

* ASTM-A615

* ISIR 3132

Company

Type

This product is a final B2B equipment.

Main Export Destinations

, , , ,

Product Categories
My Cart
Categories