5000 Series Aluminum Alloys Products – with High Magnesium Percentage (5083 and ALMG6)

Application:

Aviation, marine and car manufacturing industries


Certified ByTrust

Product Introduction:

Among the various aluminum alloys, Al-Mg alloys have suitable properties, among which high strength, good corrosion resistance, good formability and weldability can be mentioned. Thus, these materials are widely used not only in the automotive industry, but also in the marine and aviation industries. In this alloy, the magnesium element can be dissolved up to 11.7%, which increases the strength by 30 to 40 MPa. Also, adding this element to aluminum increases the corrosion resistance of this alloy. It should be noted that although the increase of magnesium up to more than 3.5% increases the strength through its dissolution in the matrix, but at temperatures below 200°C, the resulting solution is supersaturated, which causes the formation of active deposits – electrochemically – in the grain boundaries. This will decrease the strength in these areas and increase susceptibility to Stress Corrosion Cracking (SCC).

Therefore, by increasing the amount of magnesium to more than 5%, in addition to increasing the strength and brittleness of the material, the concentration of silane also increases with the partial occurrence of recrystallization.

Technical Specifications:

* The amount of magnesium is more than %4 to %6

* Thickness up to 0.4 mm

* Sheet width can be changed according to orders

Advantages:

High added value

Company

Type

This product is a final B2B consumer product.

Main Export Destinations

,

SKU: 10005 Category: 
Product Categories
My Cart
Categories