Ferro-Molybdenum
Application:
* Making tools and machines
* Military equipment
* Refinery pipes
* High pressure parts
* Some parts related to cars, trucks, locomotives and ships
* High speed machining parts tool
* Cold-working tools
* For different types of drill bits
* For different types of drill and screwdriver bits
* For different types of (woodworking) chisels
Product Introduction:
Ferro-molybdenum is an alloy additive that greatly increases the physical and mechanical properties of steel, creates a uniform microstructure in it, and in addition increases the hardness and impact strength of steel. This metal is cheaper and more economical as a ferroalloy, because molybdenum is a heavy metal with a high melting point, and if it is added as a ferroalloy, its density and melting point decrease. The method of preparing ferroalloys is through two types of open and closed reactors. Open reactor has lower efficiency and lower cost. This method is done by digging a hole in the ground and lining it with refractory material. After thermodynamic calculations and optimization of the ratio of each of the raw materials, the mixture of raw materials is poured into the open reactor and activated by performing a reaction arc. After a sufficient period of time due to the released heat, the materials melt and thick slag is appeared on the surface; After that, fermolybdenum is obtained by breaking the frozen melt from the slag with a Hilti hammer. To produce ferromolybdenum, molybdenum sulfur obtained from copper sludge should be converted into oxide and ferromolybdenum is produced by reduction method with iron.
This alloy is used in heavy casting, and in general, when steel needs high heat resistance, we make use of this alloy.
Technical Specifications:
* Improved hardness
* Reduction of thermal brittleness
* Resistance to hydrogen cracking and sulfide stress cracking
* Increased thermal resistance
* Improved weldability
Advantages:
The added value created by the high-tech technical knowledge of product production
Company | |
---|---|
Type | This product is a final B2B consumer product. |
Main Export Destinations |
- Agriculture, Livestock, Poultry and Aquatics
- Chemicals
- Construction Industry
- Electronics
- Energy & Power Plant Industries
- Food Industry
- Game & Animation
- Industrial Machinery
- Laboratory Equipment
- Medical Equipment
- Medicine & Health
- Metals and Ceramics
- Mining Industry
- Oil, Gas & Petrochemical
- Paints, Resins & Polymer Adhesives
- Polymers and Composites
- Power & Control Engineering
- Software & Information Technology
- Telecommunications
Related Products
Application:
Car manufacturing industries
Application:
* Production of stainless steel, hard steels and some valuable alloys
* Plating and creating a hard and beautiful surface and also to increase anticorrosion resistance
* In casting for the production of chrome iron
* To harden and increase the chemical resistance of steel
Application:
To make parts for cases where there is severe abrasion and corrosion, (such as galvanized line bearings, steel factories, etc.)
Application:
* Production of aluminum-magnesium sheets with very high strength and low thickness (with rolling and extrusion methods)
* Construction of aerial structures
Application:
Aviation, marine and car manufacturing industries
Application:
* CO2 trapping
* Removing carbon dioxide from chimney gas
* Natural gas purification and hydrogen purification
Application:
Aviation, marine and car manufacturing industries
Application:
Oil, gas and petrochemical industries, power generation, aerospace