Alumina Spinel Refractory Mass – Induction Furnace Mass

Application:

Wall of induction furnaces during steel production


Certified ByTrust

Product Introduction:

Alumina spinel refractory mass is a mass that can be used in the walls of induction furnaces during steel production. Commonly, silica mass is used in the walls of induction furnaces, which is very suitable for producing cast iron. But an alkaline or neutral mass should be used due to the steel reaction and its slag with silicon mass. This mass is chemically neutral and has at least 80% alumina. The higher price of this mass is due to the higher cost of the raw materials used.

One of the ways to increase the sinterability is using nanometer compounds in the refractory, which is not economically justified due to the high price of these materials. Based on the research done by its experts, this company has started using additives for better sintering. In fact, with this work, the cost problem is completely solved; on the other hand, it is possible to mix this powder uniformly inside the mass. This will cause the formation of very fine particles in situ inside the mass and better sintering of the outer layer.

Technical Specifications:

Brand name

ZicoRamAl 86

Raw material

High quality alumina, magnesia and spinel

Maximum grain size (mm)

0-6mm

Installation method

Vibrating-ramming

Nature of bond

Ceramic

Required material (t/m3)

3.0-3.2

Maximum service temperature (°c)

1850

Advantages:

* Increasing sinterability by using special additives and eliminating the cost of this method by using nanometer materials.

* The possibility of uniform mixing of this powder inside the mass

Company

Type

This product is a final B2B consumer product.

SKU: 10035 Category: 
Product Categories
My Cart
Categories