All kinds of Ceramic Parts of Alumina Base – and ceramic chamber of combustion chamber of gas turbines

Application:

Steel Industry


Certified ByTrust

Product Introduction:

Alumina-based ceramic products: These products must be homogenous with the melt in terms of phase and chemical properties due to their use in the steel industry and proximity to melt and corrosion. The freeze casting method is used in this company.

The ceramic chamber of combustion chamber of gas turbines: The combustion chamber of gas turbines usually has a high temperature of about 1100 degrees Celsius; Therefore, high thermal stresses and erosion of hot gases are expected in these parts. The refractories used in this industry have special conditions and must obtain rigorous approvals because the early and sudden failure and destruction of firebricks creates a fundamental problem in this industry; Therefore, the bricks of the combustion chamber of gas turbines must be very resistant to thermal shocks and withstand high temperatures in a long period.

Technical Specifications:

Physical characteristics of Ceramics of the combustion chamber Description Density 2.9±0.1 gr/cm3 apparent porosity 18% ± 3 thermal conductivity 2.6 ± 0.2 w/mk Resistance to thermal shock > 30 shocks Physical characteristics of alumina-based ceramics Description Density 2.8 – 2.85 gr/cm3 Service temperature 1800 oC Apparent porosity 18 %

Company

Type

This product is a final B2B consumer product.

SKU: 10042 Category: 
Product Categories
My Cart
Categories