Insert (Turning)
Application:
For chipping in the machining process (depending on the geometry and properties of these inserts)
Product Introduction:
Turning inserts are parts with high hardness and abrasion resistance used for chipping in the machining process. These tools have specific and standard shapes and are produced in particular dimensions. Unique inserts should be used depending on the machining operation type and the machined part’s speed and material. Machining operations and loading speed are mentioned in the standards and manuals of each tool.
The production method of these parts is that first, tungsten carbide powder is weighed with cobalt, and then it is poured into attritors or tungsten carbide ball mills, then it is ground in a hexane environment for 7 hours and transferred to the spray dryer; After the formation of granules, the samples are pressed by multi-stage single-axis presses, and after deburring, they are ready for baking in a controlled atmosphere furnace or a furnace with high gas pressure. After the sample is baked and its complete sintering (frittage), the pieces are sized by the stone and are prepared for the coating stage.
Technical Specifications:
* Approximate weight between 8 and 10 kilograms
* Hardness around 1400 to 2000 Vickers
* High strength of 400 MPa
Advantages:
* Ability to operate at high speeds
* High volume loading
International Standards or Permission:
* System management quality certificate from IQNET
* ISO 9001/2008
Company | |
---|---|
Type | This product is a final B2B consumer product. |