MGT-30 Gas Turbine Series – Turbogenerator and Turbocompressor
Application:
Electric power production and mechanical thrust of rotating equipment such as compressors and pumps in various industrial processes
Product Introduction:
The 25 MW MGT-30 gas turbine is used to produce electric power and mechanical thrust for rotating equipment such as compressors and pumps in various industrial processes. The nominal speed of this turbine in turbocompressor and turbopump units is 5000 rpm. Another type of this turbine, which is designed for electricity generation, has a speed of 3000 revolutions per minute and is used in small and simple combined cycle power plants, including mobile power plants, CHP units, and in various industries such as water desalination.
This gas turbine with 36% efficiency includes two separate Gas Generation sections, including low-pressure and high-pressure compressors, 16 Can Annular combustion chambers, low-pressure and high-pressure turbines, and the Power Turbine section includes a power turbine with rotary and stator blades.
Technical Specifications:
|
Gross output power |
25 MW |
|
Shaft speed |
3500-5000-5250 rpm |
|
Frequency |
50 Hz |
|
Weight (main engine) |
14.2 , 15.1 tons |
|
Dimensions |
2.5 × 2.3 × 6.3 , 2.5 × 2.4 × 6.3 m |
Advantages:
* Change in the liner cover and redesign of the cooling system of areas prone to burns
* Improvement of bushing surface roughness
* Use of coating in the blade root of the 3rd and 4th rows of LPC, as well as changing the control process and changing the assembly method of these blades
| Main Export Destinations | |
|---|---|
| Company | |
| Type | This product is a final B2B equipment. |
Related Products
Application:
* Turbodiag product: Condition monitoring and troubleshooting of gas turbines and other rotating machines in the oil and gas industry
* Turboflex product: Optimization of turbine performance in the gas turbine control system
* Turboram product: It is used in all centers that use gas turbines.
Application:
Turbine speed controller in various applications such as turbo pump, turbo generator and turbo compressor.
Application:
Used in gas power plant (simple cycle) for electricity regeneration
Application:
Converting fuel energy into other forms of energy such as electrical and mechanical
Application:
Extracting thermal energy in the combustion chamber and transferring it to the shaft in the turbine
Application:
Power plant industries
Application:
Electricity generation and mechanical propulsion
Application:
Directing hot gases (more than 1000 degrees Celsius) from the combustion chamber to the inlet and turbine blades
Application:
Oil, gas and petrochemical refineries and gas transmission lines
Application:
An engine for burning fuel and increasing the temperature of the incoming air in gas turbines
Application:
* Fixed blade: Speeding up the gases entering the turbine
* Moving blades: Converting the internal energy of incoming gases into mechanical energy