Gas Turbine Flowmeters with Accuracy Below One Percent – Gas Turbine Flowmeter
Application:
Measurement of gas consumption of industrial units
Product Introduction:
This product has three precise main parts, which include the body, rotating rotor inside the body, and the transmission and index (or indicator) set. The body of these meters is manufactured and tested according to EN12261 and 102-IN-IGS standards. Due to the very high sensitivity of this product, special
arrangements have been made in the standards and test methods, in which special materials must be used in the first part, i.e. the body, and precise dimensional tolerances must be taken into consideration due to the installation of the rotor inside it. The specific materials of the rotor and its balance and the choice of the type of bearings used and the angles of its blades are very important, which makes its construction difficult.
Technical Specifications:
Flow measurement |
Between 5 and 6500 cubic meters per hour |
Pressure class |
300 ,600 and 150 ANSI |
G-rate flowmeter |
65 to 4000 G |
Nominal size of the flowmeter |
12-2 in |
Company | |
---|---|
Type | This product is a final B2B equipment. |