Testing and Alignment Services of V94.2, GE-F9 and MHI Turbine Fuel Injectors

Application:

Carrying out the combustion process in turbines


Certified ByTrust

Product Introduction:

The combustion process in turbines is performed through a sensitive and important part called fuel injector. It is possible to supply the necessary combustion for the rotation of the turbine and generator and the production of electricity with the help of fuel injectors; For this purpose, it is necessary to inject fuel with high pressure (about 50 bar) into the fuel injector.

The fuel injector, with its special mechanism, turns this fluid into a powdered form and places it into the combustion chamber with air in full rotation. At this stage, combustion takes place. Combustion products enter the turbine and cause it to rotate rapidly. Finally, the generator turns and produces electricity.

Technical Specifications:

V94.3 Turbine

٭ Injection rate: 40 litres/min

٭ Input pressure: 50 bar

٭ Output pressure: 6-33 bar

٭ Service temperature: 1100

MHI Turbine

٭ Injection rate: 32 litres/min

٭ Input pressure: 45 bar

٭ Output pressure: 10-25 bar

٭ Service temperature: 1150

GE-F9 Turbine

٭ Injection rate: 30 litres/min

٭ Input pressure: 45 bar

٭ Output pressure: 20 bar

٭ Service temperature: 1150

Company

Type

This product is a final B2B service.

SKU: 11052 Category: 
Product Categories
My Cart
Categories