Power Plant Heat Recovery Boilers (HRSG) – Class E (Up to 240 TON_HR Capacity) of Horizontal Type
Application:
Used in all kinds of turbines
Product Introduction:
The heat recovery boiler (HEAT RECOVERY STEAM GENERATOR) is placed on downstream of the gas turbine in combined cycle power plants. In this way, the very significant energy of the exhaust gas flow from the high-temperature gas turbine (about 550-570 degrees Celsius and higher), instead of being wasted and released into the atmosphere in simple gas cycle power plants, is emitted by the exhaust smoke duct to the heat recovery boiler, where by transferring the energy of the smoke to the water/steam fluid inside the pipes of this type of boiler, the temperature of the smoke decreases to a significant extent (about -105 85 degrees Celsius) and exits the boiler chimney towards the atmosphere; Therefore, the energy transferred to the water cycle and boiler causes the production of steam and its superheat, and this produced steam by moving between the blades of the steam turbine causes the production of power in the steam turbine generator; Therefore, the efficiency of the simple cycle of the gas turbine which is about 3540%, increases to the efficiency of the combined cycle of about 55-61% by using the heat recovery boiler and steam turbine and other necessary equipment such as the condenser (as a steam unit against the gas unit). Also, this efficiency increase of about 20% for the same fuel consumption in two simple gas turbine cycles and combined gassteam cycle means a significant increase in power production
Technical Specifications:
* Simpler design compared to output power
* Shorter time to generate steam
* Optimal use of thermal energy
* Reducing environmental pollution due to lowering the temperature of exhaust gases and its optimal reuse
Company | |
---|---|
Type | This product is a final B2B equipment. |
Main Export Destinations |