Warm Traffic Paint

Product Introduction:

This color can be applied to specify traffic signs and traffic directions on the surface of inner and outer city roads and on asphalt and concrete surfaces, etc.

This resin is in the form of thermoplastic, which melts due to heating and becomes cold and permanent by spraying on the surface for a few seconds. This product is used to show traffic signs on the street to guide drivers.

Technical Specifications:

The first component of this product is resin, which is produced in Akbar company. This thermoplastic resin actually forms the main body of the paint, which plays the role of sticking to the asphalt surface as a result of heating and re-cooling (this part constitutes 40% of the formula). The second component is glass bead, which uses glass with a special mesh and helps the driver in reflecting light and identifying traffic signs (especially at night). In addition, this part increases the physical resistance of the resin against abrasion to some extent (its contribution in the formula is 15%). The third component is the filler, which is made of powdered calcium carbonate and usually makes up 10% of the formula. Another part is plasticizer, which is added to soften and lubricate the resin during execution. Usually, the material of these plasticizers is polyester, which is prepared in this company from PET waste and polyethylene glycol (5% of the formula is made from this part).

Advantages:

High volume production and low prices