One-Component Solvent-Based Thermosetting Acrylic Resin
Application:
The use of this resin is more common in metal industries and it is most used there. Its other uses are in the production of various furnace coatings, glazed coatings for kitchen and laboratory equipment, can coatings, etc.
Product Introduction:
These resins are made based on acrylate and butylated amide monomers and have self-curing capability at 150 to 200 ºC and for 20 to 30 minutes. The final coating that has formed a film under these conditions has a high gloss and has very good mechanical characteristics. Also, due to the reticulation of the coating, they have a very high resistance to detergents and solvents. In order to improve the final properties, auxiliary resins such as amino resins or epoxy resin can be used in a small amount. Although it is better to test their compatibility before use.
Technical Specifications:
In this product, the hydroxyl group is cured with isocyanate in the environment: because the hydroxyl groups react with butylene and form a network. The solvent used is normal butanol and condensation is done between amine monomers.
Advantages:
Proper quality
International Standards or Permission:
ISO-9001-2015
| Company | |
|---|---|
| Type | This product is a final B2B customer product. |
Related Products
Application:
These resins are used in the production of elastic coatings with high elasticity and low water absorption, as well as sound and temperature insulation coatings used in sheds. They are also used in the production of interior facades and building paints for interior and exterior use, adhesion to cement, asbestos, concrete and other substrates.
Application:
The desired resin is used as a polyol agent in polyurethane coatings. These polyurethane coatings are used in automotive or protective coatings due to the high mechanical properties caused by this polyol.
Application:
* It is used to finish leather goods and cover the surfaces of these products. These products contain acrylonitrile in their structure, which creates good adhesion to leather surfaces.
* Another group of these resins are also used in adhesives and the production of adhesive back labels and tapes.
Application:
The produced resin is used in the casting industry, especially the casting of delicate parts (such as car parts) using the cold box method. This product has no other alternative.
Application:
This resin is used in all kinds of home appliance coatings and can coating.
Application:
This resin is used as a hydroxyl agent in combination with isocyanate to produce polyurethane.
Application:
This category of resins is used in different uses of air dry coatings such as:
* Special coatings for all types of plastic and metal surfaces
* Traffic covers (road and traffic lanes)
* Facade coatings (keeler on stone, plaster, clay and concrete surfaces)
* Pool and spray paints
* Types of laminate adhesives
* Types of printing inks
* Varnishing a photo decal
Application:
These resins are used as thickeners in the formulation of detergents such as shampoos, latexes, and facade paints. The slight tendency of this product to sedimentation during storage causes stability of viscosity and regulation of the rheological behavior of the paint.
Application:
The main use of resin with high solid percentage is in the formulation of paints that require less solvent. This issue is very important due to the strict regulations limiting the volatile components of VOC chemical products in Europe. Reducing the consumption of volatile solvents, especially in the dilution stage before application, is one of the main ways to adjust the formulation to meet environmental standards. In order to reduce the consumption of paint thinner and solvent, a formulation is necessary that, despite having a sufficient amount of resin in the formulation, the paint can be brought to the target viscosity with less solvent.
Application:
It is used in the final finishing of leather products.