Online Analyzer and Controller of Residual Chlorine in Water
Application:
Controlling and monitoring chlorine in various industries, including water & wastewater company, food, chemical, oil and gas and petrochemical industries, power plants, etc.
Product Introduction:
The online residual chlorine analyzer is equipped with an internal intelligent PID control system and uses an amperometric cell without a membrane to measure residual chlorine in water. The sensor of this device is designed to work in harsh environments and different types of water and wastewater of different quality and can be installed at a distance of more than 300 meters from the central device.
The function of this type of sensor is based on the electric current that occurs as a result of the chemical reaction between chlorine dissolved in water and the cathode and anode electrodes. By increasing the amount of residual chlorine in the water, the reaction speed increases and more current is created in the amperometric cell. The automatic chlorine injection control system of this device is designed in such a way that the operator only enters the requested amount of chlorine into the device and the processor system, by gradually learning the behavior of the network and sending control commands to the liquid or gas chlorination equipment, adjusts the injection amount at all hours of the day and night. Despite changes in consumption, changes in the volume and quality of raw water and other parameters will remain fixed.
Technical Specifications:
Data logger | Caliberation periods | Degree of sensor protection | Measurement accuracy | Power consumption |
MAX 4GB
micro SD |
>1000 H | IP 67 | 0.1 mg/Lit | <10 W |
Advantages:
* High product quality
* Longlasting life and stability of the product
* Reasonable and competitive product price
International Standards or Permission:
* IEC61326-1 2012
* EPIL certificcate
Company | |
---|---|
Type | This product is a final B2B equipment. |