System of Electronic Device – Limiting the Capacity of Regulators of Pressure Reduction Stations
Application:
* All intra-city gas pressure reduction stations (TBS)
* Gas pressure reduction stations for large industries and factories
* Gas pressure reduction stations outside the city (CGS)
Product Introduction:
This device is used to control the flow rate of gas from the regulators in gas pressure reduction stations. Regulators are the main equipment in gas pressure reduction stations, which only have the task of reducing and controlling gas pressure and do not have control over gas flow rate. Since the flow rate of gas usually increases greatly beyond the permissible limit during the cold seasons of the year and the peak time of gas consumption, this increase leads to a lot of noise and damage to the track equipment such as the regulator itself, filters, etc.
By adding this device to the existing regulators, it is possible to control the flow rate of the line and divide the gas flow to other gas transmission lines so that, in addition to the gas pressure control which is done by the regulator itself, the flow rate through the route is also controlled according to the allowed range and other gas passageways are put into service, if the flow rate increases.
Technical Specifications:
* Body material: Stainless steel
* Orifice size: 2.5 mm according to the orifice size of pilot regulator
* Temperature range: -10 to 60 0C
Advantages:
* Special placement of the device on the regulator
* Linear valve control from 0 to 100% with EX standard and small and light size
* Fuzzy control system
International Standards or Permission:
ATEX standard
Company | |
---|---|
Type | This product is a final B2B equipment. |